CR-10 S5 double damper Y stepper motor bracket
Description
I Took Scholles Idea And Based On His Idea Made A New Design Fitting The Cr-10 S5. If You Have A Different Cr-10 Than The S5 You Might Be Better Off With The Original Version Https://Www.Thingiverse.Com/Thing:2701747 But This One Doesn'T Fit The S5. I Haven'T Tested My Bracket On Any Other Printer As I Only Own This One. I Have Designed It To Be Printed Lying On The Profile Towards The Stepper As It Doesn'T Require Support This Way. I Used M3X12 To Fix It To The Stepper And M3X18 To Fix It On The Profile As I Still Had M3 Hammer Nuts Lying Abouts. The Holes On The Bracket Are 4Mm, So You Might Just Be Able To Get An M4 Through. To Fix The Damper I Used M3X60 Which I Ended Up Shortening. M3X55 Should Probably Work But I Haven'T Tested.
Statistics
Likes
71
Downloads
0