JYSK Basic Box 29l filament drybox
Description
I Designed A Filament Drybox To Keep Filament Dry And Clean. So Far It Hold Up To 5 Filament Spool Each 1 Kg. There Is Room For 4 Spools Hanging From The Pipe And 1 Spool Laying On Horizontal Spool Holder (Which You Need To Download Separately - Https://Www.Thingiverse.Com/Thing:2949128). Shopping List: - Basic Box 29L From Jysk - 35 Cm Of Pcv Pipe 1" (33,4 Mm Outer Diameter) - 8X M4 35 Mm Screws (Or Longer) [1] - 14X M4 10 Mm Screws (Or Longer) - 22X M4 Nut - 44X M4 Washer - 5X ~10 Cm Ptfe Tube - Hygrometer (Dimensions Of Mine Was 45 X 27.5 Mm) - Silicone Gasket Maker - 200 - 300 G Of Silica Gel (Best One Would Be With A Marker) - Box For Silica Gel (Smaller Then 10X20X10 Cm) Printing List: - 2X Inner_Pipe_Slot - 2X Outer_Pipe_Slot - 5X Outer_Filament_Socket - 5X Inner_Filament_Socket - 2X Hygrometer_Frame - 2X Pipe_Plug - 1X Horizontal_Bottom - 1X Horizontal_Top - 1X Gasket_Shaper - 10X Lid_Clip I Also Designed Plugs If Someone Would Like To Change The Location Of Filament Sockets Or Hygrometer, Replace The Outer Part With The Plug And Place Filament Socket Or Hygrometer Somwhere Else. [1] I Used 30 Mm Long But I Do Recomend Longer One _____________________________________ 16.06.2018 - Published
Statistics
Likes
56
Downloads
0