Crystal Light tube cutter
Description
I Just Love This Tube Cutter! It Works Great For Tubes. It Works Great For Filaments And Now It Works Great For Crystal Light On The Go Packets. I Got Hooked On These Crystal Light On The Go Packets. I Like The Lemon Iced Tea. Sometimes Though I Have A Hard Time Opening Them. It Seems Like Sometimes The Score Lines Aren'T There And I Have To Use Scissors To Cut It Open. Now I Have A Dedicated Tool. This Works Great. I Had To Revise It Several Times Because The Razor Blade Would Just Push The Packet Down Into The Groove Without Cutting It. So I Got Rid Of The Groove. The Razor Comes Down To A Flat Spot Now So Instead Of Scissoring Action Or A Shear Action, Now It Is More Of A Pinch Action. Be Very Careful - Use This At Your Own Risk. There Is A Lot Of Razor Blade Sticking Out. And Use Pliers When Installing The Razor Blade. Use Common Sense - Save Your Fingers! I Printed These In Pla .2 Layer 20% Infill If You Want Precise Repeatability, I Made A Drop In Jig. The Cutter Sits In A Pocket And That Puts The End Stop At 96Mm'S From The Blade. You Might End Up Gluing Them Together. This Is An Impact Tool. Https://Youtu.Be/3Xly5Xl-Cuu
Statistics
Likes
3
Downloads
0