Tool Holder_Lulzbot
Description
This Tool Holder Fits On The Upper Bar Of The Lulzbot Taz 5, But Should Fit Any Machine With The Same Size Framing Extrusion. Magnets On Each End Make Easy Holding Of Side Cuts, Wrenches, Razor Blades. Etc... The Following Tools Used Are From Harbor Freight: 4-3/4" Pliers (40697) 4-In-1 Screwdriver (69470) *If You Remove The Inserts From This Screwdriver, The Hex Fits Two Of The More Popular Nozzle Sizes. 6 Inch Adjustable Wrench (67149) 2Pc, Ceramic Block Magnets (97504) 10Pc. Metric Hex Key Set (94597) Stl File Will Need Resized By 10. (Longest Length 126.05Mm) This Prints Best With Top Of Part On Build Plate. Use Supports For Best Results. It Is Likely You Will Need To Sand Or Shave The Wedge Shape That Locks The Holder To The Lower Portion Of The Aluminum Extrusion.
Statistics
Likes
3
Downloads
0