Improved Z Axis for Cyclone PCB Factory
Description
Z Axis For Cyclone To Prevent Movement When Drill The Pcb. Robust And Stable. I Create A Site Where I'D Like To Add Tutorial And Similar, Stay Tuned. Www.Mischianti.Org Update 01/02/2019: Now You Can Download An Holder For 50Mm Splindle, Not Tested, Please Give Me Feedbak. Refer To My Site For Update And Missing Parts. The Main Cyclone Pcb Factory Project Is Described Here Https://Www.Mischianti.Org/2019/03/27/Improved-Z-Axis-For-Cyclone-Pcb-Factory/ Https://Www.Mischianti.Org/Tag/Cyclone-Pcb-Factory-How-To-Build-It/ For Gears I Use A 4:3 Ratio. I Use Standard Cyclone System For Connection, Movement And Bearing. The Threaded Rod Have In Sequence (From The Bottom) 1 Bearing B608Zz Already Inserted In The Structure 1 M8 Blocked Nut 1 M8 Nut 1 Spring (As Other In Cyclone Pcb) 1 Washer 1 M8 Nut 1 M8 Blocked Nut 1 Bearing B608Zz (Inserted In The Threaded Rod) First Insert Bottom Bearing Then In The Threaded Rod Instert All Other Quite Near. Insert The Threaded Rod In The Top (With The Other Bearing Inserted In The Rod To The Top), The Insert The Rod In The Bottom Bearing (With The Blocked Nut About 4 Mm Inserted). Then Insert The Gear In The Top And Stop The Top Blocked Nut With A Pair Of Thin Pliers Then Rotate The Gears To Permit The Blocked Nut To Go Near The Top Bearing.
Statistics
Likes
41
Downloads
0