Hypercube Evolution Mk3 Orion and Nimble
Description
I Designed A Mount For My Hypercube Evolution To Fit The Orion Module From Precision Piezo And The Nimble From Zesty. I Use The Groove Version Of The Orion Module. For Cooling The Coldend I Use A Nocuta 40X20Mm Fan. I Put The Fan On The Right Side, Because I Use The Left Side For The Endstop Switch. I'Ve Also Added The Stl From The Original Prusa Mk3 Fan Duct. As X Carriage I Would Recommend The Upgraded Version From Nedallive Https://Www.Thingiverse.Com/Thing:2437440. I Use Just Three Instead Of Five Screws To Attach The Mount To The Carriage. #Note: Please Use Din 562 Squarethin Nuts For This Mount, You Will Need About 10 M3 Squarethin Nuts And About 5 M3 Din 934 Hex Nuts. #Updates: >-Step Files Included >-Removed The Brass Inserts >-Removed Some Leftover Edges From An Other Modification I'M Working On >-Fixed A Hole On Top Of The 40Mm Fan >-Moved The Hole For The Nut On The Bottom Left Corner A Bit Up, So The Part Will Not Crack There As Easy As Before -Added The Old Holes For The Original Mount, Now It Has 5 Fixing Points #R3 Update ->Changed The Version To A 45° Angle Style, Like The R3 From The Original Prusa Design ->Added Also A 45° Volcano Fan Design If You Are Looking For A Version Without The Orion Module, Take A Look At This Awesome Mount: Https://Www.Thingiverse.Com/Thing:3044328
Statistics
Likes
39
Downloads
0