Knife sharpener - Wusthof whetstone
Description
Custom Made For My Wusthof Whetstone (Ref 704773), Here Is My Sharpening Device ! Inspired By Some I Found Here, I Made My Own, According To My Tastes And Needs. I Purchased The Stone Online On Knivesandtools (24€ + Shipping) , Very Happy With It, But Wanted To Be More Precise While Sharpening My Knives, So ... Here It Is. Stone Sizing : 150Mm X 50Mm X 24.5Mm Tube Used : 10Mm Aluminium (Pretty Close To 3/8 Inch) Bolts Used : M5 (And The Nuts Fits Tightly, No Need To Glue Them) And Small Wood Screws For Stone Holder. Magnet Used : 10Mm Wide, 2Mm Thick. (A Bit Tricky To Fit Them, But Once In Place They Won'T Move.) You'Ll Find Two "Angle Parts", 20 And 25°. It'Ll Help You Calibrate The Device For The Angle Needed. (Knives Are Usually Sharpened Between 17 And 25°, Depending On The Origin And Need Of Sharpness. The Thinner The Angle, The Sharper It Gets, But Wear Faster) I Uploaded All The Stl Files, As Well As The Assembled Part : Don'T Print It ! You Wouldn'T Be Able To Use It ...But Could Be Helpfull To Help You Figure Out How To Make It Work. Feel Free To Ask Anything, I'D Gladly Help ! And ... Please, Don'T Forget To Wet Your Stone Before Using It. It'S A Whetstone, It'S Designed To Be Used With Water. Not Dry. If You Ain'T Sure, Have A Look Online, There Is Lots And Lots Of Informations On The Process ! Cheers ! [Update] Following Request, I Added A 35X25Mm Stone Holder ! [Update] Big Update, After Almost 6K Downloads (That'S Huge, Thanks) - A Bit Of Clean Up In The Files / Names, Should Be Easier Now. - Added A 17° Angle Calibration Part - Updated The Two Slider Parts, After Mine Failed. I Made A Larger Hole, So It'S Easier To Use; And Made The Parts Sturdier. - I Added A Small 8Mm Hand Knob, To Use With M5 Hex Screw. This Way, I Can Adjust The Height Of The Slider, And The Retainer,Without Tools. Cheers !
Statistics
Likes
201
Downloads
0