Ultron 7 Helmet
Description
Ultron 7 Helmet I Modeled Up For A Crimson Cowl Costume. I Am In The Process Of Printing It Now. It Took Me A While To Dial In The Petg Settings On My Cr10. ***I Finished My Preliminary Print. I Need To Make A Couple Of Slight Adjustments (Nudge One Of The Tools For The Circle Surrounding The "Ear" On One Side - It'S A Tad Too Deep, And Open Up The Bottom A Bit More To Make It Wearable). I'Ll Do That This Weekend. I'Ll Do, What Should Be, The Final Print Once I Get My Hands On Some More Petg. Matterhackers Is Flat Out Of 1.75Mm Petg At The Moment. Also, My Octopi Crashed About 75% Into The Print. Tried To Guestimate Where To Start From To Finish It Off, But Misjudged By About Ten Layers... In The Wrong Direction. :\ ***I'Ve Made The Adjustments I Think Will Take Care Of Everything. I'Ll Start Up Another Print Tomorrow To Make Sure Everything'S Ship-Shape. If It Is, I'Ll Upload The Final Version When The Print Is Complete. Thanks For The Patience, Folks. :) ***Finally Got A Good Print. Makeshaper'S Petg, A Raft (Due To The Amount Of Very, Very Tall Supports), Slow Speeds (50Mm/S) And A Lot Of Patience. I'Ll Be Uploading The Final Version This Weekend. I'Ll Include Both The Stl And The Fusion 360 Files. Forgive My Willy-Nilly Design "Process" In Fusion. ;) Painted The Final Print With A Super Gloss Black, Then A Few Layers Of Spaz Stix Mirror Chrome. Uploaded Photos Of The Drying Parts. Will Upload Photos Of The Final, Assembled Helmet Once It'S Done.
Statistics
Likes
67
Downloads
0