MR236 Quadcopter (5 inch)

Description

Update: I Don'T Recommend Printing This Anymore. "Newer" Flight Controller Firmware Has Problems With Non Rigid Frames. There Is Not Enough Filtering And Can Cause A Flyaway. After Being Inspired By Tech2C'S Peon230, I Designed My Own Quad. This One Has A 236Mm Diagonal And Has A Long Style Body So The Props Don'T Come Into View. There Are Mounting Holes For Standard Size Fc'S. The Standoffs Are Best Printed, So They Fit In The Top Plate Notches. I Made These 30Mm So My Standard Size Camera Just Fits. In The Back There Is A 45 Degree Mounting Hole For An Sma Pigtail. The Receiver Antennas Can Be Mounted On Zip Ties. The Arms Accept 22Xx Size Motors, 16X19 Slot. Hardware: Countersunk M3X10 (X28) - Arms & Spacers M3 Nut (X8) - Arms M2X6 And M2 Nut (X2) - Fpv Camera Mount (Alu Bracket)

Statistics

Category

Tags