BarYak Mule Bottle Cage/Accessory Mount
Description
Baryak Makes An Adapter That Zip-Ties To Your Frame/Fork, Which Provides 4 Threaded M5 X 0.8 Holes For Mounting Bottle Cages, & In Line With The Bikepacking Trend Nowadays, Cargo Cages Like The Salsa Anything Cage & Others. The Baryak Mule Is $60/Pair Though, & We Can Do Better Than That: Http://Www.Baryak.Com/New-Products/Baryak-Mule-Double-Mule-With-Install-Kit Picture Above Is From Their Website. Hardware: - Zip-Ties Up To 3/8" Or 10 Mm Wide - M5 X 0.8 Bolts There Are Two Versions In The Files: A Machined Version, & A Printed Version. You Cannot Use The Machined Version Via 3D Printing; The Threads Would Be Problematic (Too Thin, Etc.). To Address This Issue, The 3D Printed Version Is Twice As Thick To Allow For Locknuts (8 Mm Width, 5 Mm Deep) To Be Sunk Into The Piece. Holes Are 64 Mm Apart; This Is The Bottle Cage Mounting Standard. See Dimensions Here: Https://Salsacycles.Com/Files/Tech/12496_Sal_Anythingcage_Hd_Inst.Pdf For Installation, Check Out Baryak'S Website As Linked Above. I'M Likely Never Going To Test This Since My Frame/Fork Is Already Drilled For These Bosses, But I Need Feedback In Order To Fix Problems As They Arise. I Already Anticipate The Fit Of The Locknuts Being A Potential Issue (Scaled Width/Height By 115% As A Starting Point).
Statistics
Likes
38
Downloads
0