Korg Volca Twin Track Mount
Description
I'M A Little Low On Surface Space, So Wanted To Mount My 3 Volca'S Above The Shelf I Currently Have My Korg Monologue Synth On. It'S Standard Rubbermaid "Twin Track" Shelving, The Kind Of Stuff That'S Used Commonly In Closets. I Designed And 3D Printed A Pair Of Brackets, Fastened A Couple Of Pieces Of Oak To Them, Hooked Them Onto My Existing Track And Presto - I'Ve Got The Volca'S Nicely Accessible Right Above The Monologue And At A User Friendly 18 Degree Angle! I Printed The Brackets Using Petg Material, So They'Re Good And Sturdy, Though I'M Sure Pla Or Abs Would Be Fine Too. Here Are The Two Piece Of Wood I Used. I Counter-Sunk Mounting Holes And Used 6-32 1/2" Flat-Head Screws. 1/4 X 3.5" Oak Board : Https://Www.Homedepot.Com/P/207058962 1X1 Oak Outside Corner Molding : Https://Www.Homedepot.Com/P/206013401
Statistics
Likes
8
Downloads
0