Battery/Switch Clip
Description
I Designed This Clip For Use In A Costume With Cooling Fans. I Soldered The Red Wires To The Switch And The Black Wires Together. I Used Liquid Electrical Tape To Seal The Connections On The Switch And I Used Heat Shrink Tubing On The Negative Splice. Note That I Created A Hole For The Wires. The Fans Are These: Https://Www.Amazon.Com/Gp/Product/B071Wmhng5/Ref=Oh_Aui_Detailpage_O03_S00?Ie=Utf8&Psc=1 And They Are Super Quiet. These Are The Switches That Will Fit: Https://Www.Amazon.Com/Gp/Product/B01N2U8Pk0/Ref=Oh_Aui_Detailpage_O03_S01?Ie=Utf8&Psc=1 And These Are The 9-Volt Battery Clips I Am Using: Https://Www.Amazon.Com/Gp/Product/B071Y8Jh5H/Ref=Oh_Aui_Detailpage_O03_S01?Ie=Utf8&Psc=1 I Put A Battery On The Clip Then Glued The Clip In Place So For Future Battery Change-Outs, Its All Lined Up. The Stl File Is Included As Well As The Original 123D Design File In Case You Wish To Make Changes. Update: I Tested The Battery Life And A Fresh 9Volt Battery Will Get You Just Over An Hour And A Half. I Confirmed That The Battery Does Not Get Hot While Running.
Statistics
Likes
20
Downloads
0