Flowercrane
Description
This Thing Is A Little Crane (The Arm Fixed Mounted). I Made It First Time 3 Years Ago On My Wifes Demand. She Wanted To Hang A Flower Ample Onto The Fence I Would Not Put Some Holes In. After Two Summer Seasons The Hook Broke Suddenly. It Was Overloaded When The Squirrel Jumped On The Flowerpots. Have Redrawn The Design After I Had Lost The Files Somehow. Little Changes Included. Have Cut The Designed Arm Into Two Pieces For Easier Printing With No Supports. The Detachable Crane Arm Can Be Made From The Left And The Right Half. Requirements: -2 Screws M4X30Mm -One Screw M4X40-50Mm, -Washers -Selflocking Nuts Recommended Assembling: See The Pics Lay The Hook Into The Groove On One Half, Put The Other Half Ontop, Screw All Parts Together. Start With The 2 Screws M4X30Mm. Put The Screw M4 40-50Mm Through The Front Hole. Put Some Washers On. See The Pics. . The Hook Matches The Fence Thickness We Have Hung It On. The Cutout Wide Is 88Mm. This Is The Specific Dimension You Might Have To Adjust. The Dimensions Leave No Space Between The Printed Parts. Some Processing After Printing Might Be Required Or Change The Hooks Size, Please. Edit It Online Https://Www.Tinkercad.Com/Things/Edvtc5Yehgc The Files: -The Hook -Arm Left Half -Arm Right Half Printing: Filament: Abs Or Something Other Heatresistant Infill: 80 % Layer Hight: 0.3-0.4Mm Shell/Perimeter: As Much As You Like, The More The Stronger Take At Least 3 Hang The Load On The Sides Of The Front Screw I.E. Flowerpots With Hooks Or Strings.
Statistics
Likes
0
Downloads
0