Anycubic Trigorilla stepper driver cooling tunnel
Description
Cooling Tunnel For Anycubic Kossel Trigorilla Board. The Tunnel Is High Enough For Those Big Heatsinks For Tmc2208 & Tmc2100. I Fitted Those Big Ones On Mine, Check The Pictures. Fits A Standard 5015 Blower Fan. I Got Mine From Aliexpress. I Used A 24V Version Connected To 12V, This Is A Lot Quieter Than The Full Blast From The 12V Fan. So Far This Seems To Provide Adequate Cooling. The Fan Is Mounted With 2 Screws, And The Tunnel Is Fixed To The Trigorilla Board With 1 Screw Through The Hole In The Corner Of The Board. No Glue Or Other Stuff Needed, Just Some Screws And Nuts. V2 Update: I Got Feedback That The Fan Opening Interferes Slightly With The Thermistor Connectors. They Can Still Be Attached, But They Push Against The Tunnel Without Any Clearance. I Uploaded V2 Of This Tunnel, In This Version The Fan Opening Has A Slight Offset To The Right So It Doesn'T Interfere With The Thermistor Connectors Anymore.
Statistics
Likes
154
Downloads
0