Microphone Shock Mount SM58 SM57 and Pop Filter
Description
Another Shock Mount For Shure Sm57/58. This One Is Assembled From Multiple Separate Parts (See Picture In Post-Processing). No Glue Required For V2. It Has Remained Stable For At Least 6 Months Of Ocassional Use. I Have Noticed That The Holder Piece, That I Took From Another Thing, Is Not Perfect. But It Is Good Enough For Sure (?) New Versions: * Bugfix - The Original Rings Were Too Thin, And Could Slowly Collapse Under The Tension From The Rubber Bands. Added More Copies Of The Smaller Parts To Help Keep The Whole Thing Stable. * Feature - Added A Pop Filter Scaffold. The Internet Says A Pop Filter Is A Simple Thing That Makes A Huge Difference While Recording Voices (And It Does). * Bugfix - V2 No Longer Requires Glue To Fix The Parts Together, They Simple Fit Into Each Other. V2 Pop Filter Also Fits Without Glue, And It Was Modified To Look Tidyer Once You Put In The Piece Of Thigh Sock. During The Assembly, You'Ll Need A Round Pice Of Suitable Cloth For The Actual Filter. A Piece Of Old "Tight Socks" Will Do Fine. They Are Thin And Elastic :) You'Ll Also Need At Least 6 Elastic Rubber Bands.
Statistics
Likes
35
Downloads
0