Boss XL/Med Extension Antenna Mount 30°
Description
Please Click The "Like" Button, Especially If You Download This, So I Know There Is An Interest In This Mount. Thanks! With More And More Races Using Lhcp And Rhcp Antennas, The Need To Swap Quickly And Easily Is Important. This Mount Is Designed For The Boss Xl Or Medium Frame And To Used With An Extension. It Should Work With Either A Hex Mount Or One With The Flange Pieces Coming Out The Sides. You Shouldn'T Have To Use The Screw Holes With The Flange Extensions, But I Put Holes Into The Mount In Case They Are Necessary. If You Print It Just As The Model Is (Spacer Holes Are Leaning 30 Degrees), You Should Not Need To Use Supports. You Could Use Supports, But You Definitely Do Not Want Them Inside The Spacer Holes. They'Ll Be Too Hard To Clean Out After It Prints. There Is A 45 Degree Version Of This Mount As Well: Https://Www.Thingiverse.Com/Thing:2859565 The Distance Between The Spacer Holes (Center To Center) Is 30.5Mm. ======== Team Neugen Frames ======== Boss Medium Frame: Http://Spyderbyte.Miiduu.Com/Team-Neugen-Boss-Medium Boss Xl Frame: Http://Spyderbyte.Miiduu.Com/Team-Neugen-Boss-Xl ======== Sma/Rp-Sma Extension Cables ======== Stripped To Hex Extension: Https://Www.Banggood.Com/Diy-150Mm-Smarp-Sma-Female-To-Pcb-Solder-Pigtail-Antenna-Extension-Adapter-Cable-P-1224246.Html?P=6Z050013977120130325 Mmcx To Flange Extension: Https://Www.Banggood.Com/Turbowing-Mmcx-To-Smarp-Sma-Female-Flange-Fpv-Antenna-Extension-Cord-P-1185767.Html?P=6Z050013977120130325 Ipx (U.Fl) To Hex Extension: Https://Www.Banggood.Com/Ipex-To-Smarp-Sma-Female-Adapter-Extend-Cable-Connetor-10Cm-P-1193797.Html?P=6Z050013977120130325 Ipx (U.Fl) To Flange Extension: Https://Www.Banggood.Com/2Pcs-120Mm-Rg178-Ipex-To-Sma-Female-Adapter-Antenna-Extension-Cable-For-Fpv-Racing-P-1241975.Html?P=6Z050013977120130325
Statistics
Likes
3
Downloads
0