1.25" Pool Hose Coupler
Description
When You Need A Coupler To Connect Two 1¼" Pool Hoses Together On A Weekend Out In The Sticks And Every Hardware Store Is Closed.... You Print One :) This Quick Little Print Only Takes About An Hour With A 0.3Mm Layer Height And A 60Mm/Sec Print Speed. This Is A Snug Fit And Since I'M Just Using This On The Waste Side, I Didn'T Bother With Clamps, But If You Are Using It On Either The Inlet Or Output Of The Pump, I'D Recommend Clamps Around The Hoses. --- *Another Sketchup Model - Debunking The Myth That Sketchup Is Useless In 3D Printing*
Statistics
Likes
14
Downloads
0