4 part Classic Rocket for 20x20 Printers VASE MODE
Description
Print All Parts In Vase Mode. Scale All Parts To 9804.11% !! I Got The Best Results With 2Mm Layer Hight On My E3Dv6 0.35Mm Nozzle. About 4/5 Hours Printing Time If You Increase The Speed. Base1.Stl Has To Have 2 Or 3 Bottom Layers. All The Other Parts Not. Just Use Glue On The Inside Of The Parts To Cement Them Together The Hole In The Bottom Is For Home Made Rockets: You Can Make Rockets At Home For These Classic Rockets. But Be Carefull This Design Does Not Have A Parachute. (You Can Add One) And I Will Design One With Parachute In The Future. Diy Homemade Rocket: Https://Www.Youtube.Com/Watch?V=12Fr9Nevns8
Statistics
Likes
63
Downloads
0