Roller Shade Fix
Description
My Roller Shade Broke A Few Weeks Ago. It'S Around Six Feet Long And Would Be Over One Hundred Dollars To Replace. The Price Was Just To High. I Decided To 3D Model And Print The Part Myself To Save Some Money. Hopefully You Can Download The Model And Do The Same. Below Are The Printer Settings I Used. Printer: Type A Machines Series 1 Plastic: Abs No Heated Bed Build Platform: Glass With Sanded Painters Tape @ 23 Degrees Celsius Nozzle Temperature: 239 C Nozzle Size: 0.5 Mm Slicer: Simplify 3D Layer Height: 100 Microns Brim: 5 Cm Fyi: When Using Abs. Sand The Tape A Lot. If The Print Fails. Print Again Asap To Maintain Some Heat On The Build Platform. For More Information Go Here Http://Helpme3Dprint.Com/Blogs/News/13574710-3D-Print-A-Roller-Shade-End-Plug The Filament Used In This Print Came From Http://Www.Ordsolutions.Com The Amazing 3D Printing Software Used In This Print Can Be Purchased At Http://Www.Simplify3D.Com Https://Www.Youtube.Com/Watch?V=Hhqypqwaafi&Index=2&List=Plttmhvhru01Lgo7Luommjl8L4Qz5Uwr7F Please Subscribe And Comment! Thanks, Malcolm
Statistics
Likes
6
Downloads
0