Chimera Part Cooler 30mm30mmfans
Description
A Simple Chimera Part Cooler Designed For Ease Of Installation And Wide Printer Compatibility. Ver A Printed And Tested On Flsun I3 Clone. Since It Mounts Right On The Heatsink Fan, It Should* Be Compatible With Almost Any Printer Using The Chimera Hot-End (?). Please Note The Orientation Of Heat-Blocks From The Images. Also, I Insulated My Nozzle With Some Kapton Tape. The Second Fan Was Taken From A V6 (Clone) And The Screws Provided Were Basically Self-Tapping Into The Cooler. I Decided To Shorten The "Nose" And Angle The Air Flow Down A Bit In Ver B, But Ver A Is Working For Me, So I Have Yet To Print/Test Ver B. (Left As Wip Because I Only Use One Side Of The Chimera And Ver B Hasn'T Been Tested). The Hot-End Model, E3D_Cyclops_Asm.Stp, Is From Chris And Can Be Found Here: Https://Grabcad.Com/Library/E3D-Cyclops-1 The 30Mm Fan, 30X30X10 Dc Fan.Step, Is From Phil Maddox And Can Be Found Here: Https://Grabcad.Com/Library/30Mm-Dc-Fan-1
Statistics
Likes
29
Downloads
0