This Is My Design Of Omni Wheel For Robotics Platform I'M Working On (Based On Mars Rover). Omni Wheel As It'S Name Suggest Can Move In Pretty Much Any Direciton. It Can Roll Like A Regular Wheel Forward, But Can Also Slide Sideways Thanks To Small Rollers Along It'S Perimeter. In My Case I Needed To Use Omni Wheel To Overcome "Scrub Drag" During "Skid Steering" Of 6 Wheel Platform. Here'S A Nice And Easy To Understand Article: Http://Curriculum.Vexrobotics.Com/Curriculum/Drivetrain-Design/Drivetrain-Terminology.Html Wheel Is About 120Mm In Diameter And Consists Of Multiple Parts Most Of Which Can Be 3D Printed. Hub Is Designed To Fit 12Mm Hex Shaft Motor Couplers (Like Ones Used In "Wild Thumper" 6Wd Toy).

3D Printed Parts:

- First Half Rim With Integrated Hub (Largest Part) - Second Half Rim - Omni Rollers (18 Per Wheel) - Rim Cover (Required To Hold Rollers In Place). I Laser Cut Rim Cover From 1/16" Delryn (Acetal) Resin, However It Should Be Easy To Print One As Well. I'Ve Included Stl File For It, But Never Actually Printed.

Other Parts:

- 18 X 5X24 Mm Stainless Pins/Axles For Roller Axis (Http://A.Co/Hj0Sjgk) - 18 X M3X8 Mm (Or 10 Mm Will Work) Screws - 3 X M4X16 Mm (You Can Use Longer) Screws - 1 X M4X20 Mm Screw (For Attaching To Motor Shaft Coupler If)

How I Printed It:

Note: Rim_W_Integrated_Hub.Stl Is Upside Down, So Flip It Before Printing. I Used Petg To Print Both Rims And Pla For Rollers. After Printing Rollers I Cleaned Up Bottom Of Opening A Little With Dremel To Make Sure Metal Axles Are Easily Rotated Inside. It Took About 3.5 Hrs For Roller To Print. Rim With Integrated Hub 3 Hours, Other Half Of Rim 2 Hours.

Assembly:

Insert Axles Into A Roller And Push It Into Each Slot Of One Half Rim. Make Sure Roller Is Rotating Easily. Place Rim Cover On Top And Screw All 9 M3 Screws. Plastic Seems To Hold Screws Pretty Securely, But If You Wish You Can Use Longer Screws With Lock Nuts On The Ends For Ever More Secure Assembly. Repeat For Second Half Rim. Insert Regular Half Rim Into Rim With Integrated Hub. Rotate So Each Roller Of One Half Rim Is Offset (20 Degrees) From Rollers Of The Other Half Rim And All 6 M4 Holes Of The Inner Hub Align. Just Keep Rotating It Until You See Light Shining Thru Those Holes :) Then Use Three M4 Screws To Secure Both Half Rims Together. There Are 6 Holes, But 3 Screw Are Sufficient. At This Point Your Omni Wheel Is Assembled An Can Mounted To The Motor Shaft.

Other Thoughts:

This Design Is Not Perfect And Has Not Been Tested Much. You'Ll Probably Get Much Better Results If You Can Print Rollers With Flexible Filament Or Add Rubber Coating. Size Of Rollers And Distance Between Them Is Not Ideal. Smoother Rolling And Less Resistance Can Be Created If Rollers Made Longer, But I Didn'T Find Pre-Made Stainless Dowels Of The Longer Size At A Reasonable Price. I Might Re-Design This In The Future. Video Of Wheels In Action: Https://Youtu.Be/Bnuzhnwhvlu

Found 12 3D-models for “Not a Wild Robot” across many websites

Bre In Space! MakerBot Mars Base.

Core-T Printed Wheels All Axis Spectra Driven

Z Axis Mini Mill, Seig x2, Harbor Freight, Grizzly

Large Omni Wheel

Raspberry Pi Zero W - Baseplate Mount

bee

LEVi Rover Raspberry Pi Modular Robot , OPEN Hardware, 3D Print Edition

Remixed base for guardian robot

botw guardian leg segment

Variable Angle Shaft Coupling

[.WATCH.]full— The Wild Robot (2024) FuLLMovie Online On Streamings

Not a Wild Robot