25:T5fa,

A Pen Mount For The Monoprice Select Mini To Convert It Into A Plotter. This Modification Is Reversible!

Materials:

- 1 Rollerball (Not Ballpoint) Pen Or 1 Marker - 1 Roll Of Tape - 2-4 Binder Clips

How To Use Mount:

1. Secure The Mount On Top Of The Fan. Put A Pen Inside The Mount. If It Does Not Fit, Use A Roll Of Tape To Convince It To Do So. 2. Send The Extruder All The Way To The Bottom Manually To The End Stop Switch. 3. Make Sure The Pen Is Touching The Bed Enough To Stain It. 4. Secure A Paper Onto The Build Plate With Binder Clips.

How To Plot:

1. Load Up An Image Into Paint.Net. 2. Use The "Adjustments -> Posterize" Option And Set All Values To 2. 3. Save The Image. 4. Load Up Your New Image Into Cura. 5. In The Dialog That Pops Up, Set The Height To 0.35 And The Base To 1Mm. Also Use "Darker Is Higher". 6. Click Ok. 7. In The Print Settings, Set Layer Height To 0.175 And Line Width To 0.1Mm. 8. Turn On Retraction And Z Hop. 9. Turn Off Print Cooling. 10. Set Heatbed To 0 Degrees And Nozzle To 10 Degrees. 11. With The Model, Lower It Under The Build Plate Until The Image Background Is Gone And Only Desired Details Are Visible. Optional: Inspect The .Gcode To Make Sure The Image Is Only One Layer Tall. 12. Have Fun 2D Printing!26:T8c8,

Found 52 3D-models for “2d plotter” across many websites

HugeDuino

PG02

Tiny CNC XY gear with fitting and pen arm

Plotter03

Universal elastico pen holder

Pen Plotter Mount with Spring for 3D Printer

mini plotter add on

Pen mount for MP Select Mini V2 fan

DrawPlott Drawing #Bojo-Krunk

Polargraph - Drawing machine

Wall Mount for 2020 aluminum profile

CNC PLASMA sharpie holder