XYZO Calibration Cube 20mm

Dont forget to leave a Like or Comment or even Donate!

Please make sure that the Letters are on the correct axis when printing

I was having issues with Z-height The "Standard" XYZ Cube Wasn't cutting it.
By adding the O's to each axis I could see that something was not quite right straight away (as the O became ellipse (slightly))
When modelling this I decided to hollow our the centre as there is no need for it.
By adding a Chamfer to the top and bottom it can printed without the need of all that infill and there is no need for supports.

Files added so far

XYZO_Cube_20mm_0.8_0.2.stl
XYZ-O_Cube_20mm_0.8_0.2H.stl
XYZO_Cube_20mm_1.0_0.2.stl
XYZ-O_Cube_20mm_1.0_0.2H.stl
XYZO_Cube_20mm_2.0_0.2.stl
XYZ-O_Cube_20mm_2.0_0.2H.stl
XYZO_Cube_20mm_2.0_1.0.stl
XYZ-O_Cube_20mm_2.0_1.0H.stl

XYZO - Is that standard
XYZ-O - has holes

Frst numbers in the file is the size of the cube,
Second is the gap between the outer walls and the inner walls.
Third is the recess (extrusion) of the letters and circles (H = Hole).

All letters have a 3mm gap around them, all circles are 10mm⌀
If you want a variation in the model please let me know.

Follow me on Tictok | Instagram | Twitter

Want to see cool things like this being printed LIVE 24/7?
Check out: Zombies Maker Space on Twitch!

Please Note the License, anyone found not to be adhering to it with out permission may have action taken against them.

Want to suggest something for me to make next? send me a Message .

Found 5 3D-models for “XYZ STEPS” across many websites

Calibration Axes

XYZO Calibration Cube 20mm

Axis Steps Calibration (XYZ 100mm)

Calibration Bar 50x50x10mm

XYZ Step Calibration