A 30–250 mm set of bag clips with an improved hinge and an editable source file.

What's new

Redesigned hinges that feel solid and last a lot longer
Reduced gap between the arms when closed
An easy to edit source file for all your customization needs
The clicky latch is now standard

How to print

I recommend you use PETG for its great bed adhesion and mechanical resilience. You could use PLA too, but beware that it will deform over time due to the pressure of whatever you're clamping constantly pushing the arms apart and eventually bending them slightly. If you do choose PLA, you can restore the clip to its original shape by compressing it with some kind of clamp and putting it in warm water for 10 minutes.

Common issues

The latch is too tight

Try decreacing the extrusion multiplier in the slicer by 2–5% and printing again.

The latch is too loose

Try increasing the extrusion multiplier in the slicer by 2–5% and printing again.

One or both hinges are fused at the bottom

Try moving them carefully until they break free. The clip might still be savable.
Make sure you bed is clean and parts of the hinge don't come off during printing.
Make sure you are not printing to close to the bed

One or both hinges are fused all the way through

Make sure you bed is clean and parts of the hinge don't come off during printing.
Try decreacing the extrusion multiplier in the slicer by 2–5% and printing again.
Try lowering the temperature by 5°C and printing again
Try increasing the cooling

The gap between the arms is too wide

Put the clip in hot water for 5 minutes (60-80 degrees depending on material). You can also use the heated bed for this step.
Bend the arm that doesn't have the latch outwards a bit.
After it cools off you'll get much better clamping forces

How to edit

If you want to make a custom-legth clip, add imbedded magnets, or change the design enitrely—download the .f3d file.

Changing the length:

Find the Change Parameters option in the Solid tab (it might be in the dropdown menu titled Modify).
Find the cliplength parameter
Enter the desired value in mm and press enter

Enabling/disabling arm reinforcments

Find the Reinforcement group in the timeline
Right click and sellect Suppress/Unsuppress Features

Found 608 3D-models for “clip bag” across many websites

Clip

Bag Clip

Bag Clip

Simple clip

Bag Clip with strong hinges and a strong locking mechanism

Bag Clip with automatic snap-in mechanism

5mm bar trash bin bag holder

Print-in-Place Bag Clip (Parametric)