This is a input device that imitates Garmin G1000 glass cockpit system for controlling flight simulators.
This device is designed to utilize a iPad as a display. iPad, iPad Air or iPad Pro with a display from 10.2 inches to 11 inches can be applied to this device.
Most parts that make up this device are 3D printed by FDM, but some parts are cut out and engraved from a 2mm thick acrylic plate using a laser cutter.
The details of this project are hosted at https://github.com/opiopan/simhid-g1000. Please refer [this github repository](https://github.com/opiopan/simhid-g1000) regarding manufacturing of PCBs, how to assemble this device, compelling and programming the firmware, and how to use this device. If you modify this design, Editing [this Fusion 360 format data](https://raw.githubusercontent.com/wiki/opiopan/simhid-g1000/data/SimHID-G1000.f3z) may be easer than editing mesh data published here. ### Laser Cutting "```top_panel.pdf```" is the vector data for laser cutter, red lines are outline to cut and black shapes indicate to engrave.
Matt black 2mm thick acrylic plate is well to fit. ### Multiple Printing Some models need to be printed multiple times as below. Model | # of pcs :----|:-------: button_base_bottom.stl | 12 button_base_side.stl | 20 knob_inner.stl | 4 knob_outer.stl | 5 knob_vol.stl | 2 ### Variants for each iPad There are several variants for the back housing since the size of the iPad varies from model to model.
Choose the right models to print for your iPad. Followings are correspondence table of supported iPad models and 3D model files for the back housing(as of Sep. 2021). |Screen Size | iPad Model | 3D Model Files |:----------:|------------------------------------|-------------| |10.2″ | iPad Gen 7
iPad Gen 8
iPad Gen 9| back_center_10.2.stl, back_left_10.2.stl, back_right_10.2.stl |10.5″ | iPad Pro Gen 2
iPad Air Gen 3 |back_center_10.5.stl, back_left_10.5.stl, back_right_10.5.stl |10.9″ | iPad Air Gen 4 |back_center_11.stl, back_left_11.stl, back_right_11.stl |11″ | iPad Pro 11″ Gen 1
iPad Pro 11″ Gen 2
iPad Pro 11″ Gen 3|back_center_11.stl, back_left_11.stl, back_right_11.stl ### Mirroring model This device has two slots for fixing on the back side, and this data archive include a detachable stand model, "```stand_right.stl```", to fit them.
This model is designed for right slot. In order to print a version for left slot, mirror the model "```stand_right.stl```" on any axis.

Found 12 3D-models for “fs2020” across many websites

CadetThrottle: Vernier-Style Sim Controls

Flap Baron 58

Painel de Chaves do Cessna 172

Trem de pouso do Baron 58

Flap Baron 58

Manche modelo Cessna 172

Painel de Chaves do Baron 58

Yoke Baron 58

Flight Sim G1000 (Mini)

Controller imitating Garmin G1000

Back housing of G1000 controller for Lenovo 10.1″ tab

Attitude indicator gauge