UPDATE 26Mar21. If 270° isn't enough for you, I have just uploaded a full set of 360° hinges. Happy printing! https://www.thingiverse.com/thing:4804593

Hinges

A collection of 34 different all purpose, ready-to-print, print-in-place hinges from 30 x 20 mm (1.2 x 0.8") to 100 x 50 mm (3.9 x 2"). They are surprisingly strong and come in thirteen sizes and in two flavors, 180° and 270°. This means that they can either be opened to a maximum angle of 180° or 270°, depending on what you need them for (it may come handy when the hinge stops at 180° but sometimes you may need the full 270° - also see the image above). Actually I just needed a few hinges for a woodworking project and was just too lazy to adapt some existing design - ended up making a few more and thought it might be worth sharing. :-) PRINTING. This should be an extremely simple (and fast) print. You should not need any supports or plate adhesion. Print-in-place simply means that you only need to print a single piece (rather than 2 pieces and a rod) and that it does not require any assembling. Print in 0.1 mm (for me 0.2 with adaptive layers also works) resolution with 50%+ infill (on any moderately well calibrated printer). - I print all mine using a super cheap, strong, and easy to print Carbon Fiber PLA but any strong filament (that does no stringing) will do. - They also look real good in Silk Silver or Gold, but may not be as strong. SIZES.These are the sizes currently included (size is width across both parts x height, all in 180° and 270° - they are all 4 mm thick, except for the x30 mm hinges, which are available in 3 and 4 mm): - 100 x 50 mm (3.9 x 2") - 100 x 40 mm (3.9 x 1.6") - 80 x 50 mm (3.1 x 2") - 80 x 40 mm (3.1 x 1.6") - 60 x 50 mm (2.4 x 2") - 60 x 40 mm (2.4 x 1.6") - 40 x 40 mm (1.6 x 1.6") - 40 x 30 mm (1.6 x 1.2") (in 3 and 4 mm) - 36 x 30 mm (1.4 x 1.2") (in 3 and 4 mm) - 30 x 30 mm (1.2 x 1.2") (in 3 and 4 mm) - 24 x 30 mm (0.9 x 1.2") (in 3 and 4 mm) - 40 x 20 mm (1.6 x 0.8") - 30 x 20 mm (1.2 x 0.8") PS.: The 30 mm hinges (## x 30 mm) are available 3 AND 4 mm thick. The 3 mm hinges work well but are considerably more fragile, so if you are having issues with stability, try the same size in 4 mm.

HOPE YOU LIKE THEM, AND IF YOU LIKE THEM, PLEASE LIKE THEM. THANKS! Happy printing!

UPDATE 21Mar21. I have just added a full set of the 30 mm hinges in 4 mm thickness (previously only available 3 mm). UPDATE 12Mar21. Upon request I have just added another four XS hinges: 40 x 20 mm (1.6 x 0.8") and 30 x 20 mm (1.2 x 0.8") in 180 and 270°. These are really cute and work extremely well. Happy printing!

Found 3 3D-models for “print-in-place lid” across many websites

Simple Pattern Bin with Lid

Hinges 180° and 270° - 34 Sizes, All Purpose, Print-in-Place, Ready-to-Print

Hinges 360° - 15 Sizes, All Purpose, Print-in-Place