First, I really hope you like the design and find it useful. If you feel like tipping (which I greatly appreciate), rather than hitting the "Tip Designer" button, PLEASE donate to UKRAINE (or any other people in need). There is a cold winter ahead and these people will need any help they can get (and they will need it a lot more than I do)! THANKS!! Spring is here and we needed a few adapters and replacements for our garden hoses and irrigation lines (not to mention the irrigation line I accidentally cut with a spade...). We mostly use soaker irrigation hoses connected to standard 1/2" hoses. So here a full set of hose connectors/adapters (incl. printable gaskets) for connecting - Hose to hose, - Hose to faucet, - Hose to Gardena (R) compatible, - Gardena to Gardena Hose to hose: - Faucet (3/4") to 1/2" hose - print one gasket of type 1 - Short straight (directly connect 2 hoses to each other) - Long straight - T-Connector (splitter, connect 3 hoses) - X-Connector (directly connect 4 hoses) - Terminal hose plug (seal 1 hose) - Hose to male Quick Connect adapter - print one gasket of type 2 Gardena Quick Connect compatible (including gaskets) - Faucet (3/4") to Gardena (male) - print one gasket of type 1, one of type 2 - Gardena to Gardena (male / male) - print two gaskets of type 2 - Hose to male Quick Connect adapter - print one gasket of type 2 - NEW: Outer 3/4" thread to Gardena(R) connector - print one gasket of type 2 Working on an easy to print female Gardena compatible adapter, which I must admit is a little tricky... All hose connectors have an outer diameter of 14.2 mm, which should fit most standard 1/2" hoses (which have an inner diameter of roughly 13 mm) and also work great with 12/16 mm porous soaker irrigation hoses. However, you can scale all hose to hose adapters to pretty much any size you need (including 3/4 and 1" hoses). PRINTING. I print most of my adapters in Carbon Fiber PLA (as usual) , which is a little stronger and slightly more heat resistant, looks good and is extremely easy to print. I found PETG to be a little trickier (particularly the threads) but PETG definitely helps with heat resistance. I print my gaskets in this black or transparent TPU, which works great for gaskets, but any (rather soft) flexible filament will do (as well as commercial gaskets). Print all connectors as provided (i.e. standing upright whenever possible). All parts are designed so they won't need any supports for printing (except for the T and X-connectors, which are printed lying on their side and need supports). HOPE YOU LIKE IT AND IF YOU LIKE IT PLEASE LIKE IT! Enjoy!

Found 10 3D-models for “soaker hose” across many websites

Male Garden Hose Quick Connect Adaptor Cap

Garden soaker hose stake

Female Garden hose to male soaker hose barb

1/2" pipe soaker pipe (micro poreux) to microdrip

Soaker Hose PVC Y Adapter

Garden Hose Stake

Garden hose to ground soaker attachment

Nice Soaker :)

Long range soaker

Hose Connector / Adapter Set - Gardena (R) Quick-Connect Compatible, 3/4" Faucets, and 1/2" Hoses