Hi-hat clutch
Description
I Was Inspired By A Local Drummer Kj Sawka [Https://Www.Youtube.Com/Watch?V=B98Bj36K1Wo] And Wanted To Mount My 10" Splash Cymbal Above My Hi-Hat For A More Compact Kit. Instead Of Buying More Hardware, I Learned Cad And Designed This Simple Clutch In A Few Hours. This Is The Third Iteration - The Other Two Broke When Wailing On The Cymbal. This One Is Quite Strong. Use An M4 Nut And Bolt To Secure The Clutch To The Hi-Hat Shaft. If You Don'T Have Metric Hardware Available, A #6 Or #8 Machine Screw Will Work Too. Hand-Tightening The Bolt Should Be Sufficient, But If The Cymbal Slips Down The Shaft, You Can Give The Bolt A 1/4 Turn With A Wrench. My Hi-Hats Are Gibraltar With A 7Mm Diameter Main-Shaft. If Your Hi-Hats Have A Significantly Larger Or Smaller Shaft, Then You May Need To Augment The Design. I Parameterized Almost Everything In The Cad File. ===== Update, After 6 Months The Screw Part Broke. I Re-Designed It To Be A Lot Stronger And Moved The Nut/Bolt To The Bottom.
Statistics
Likes
16
Downloads
0