ng':70B 'stronger':189B 'sufficient':111B 't':90B 'the':54B,57B,64B,79B,82B,107B,114B,118B,123B,162B,169B,176B,192B,195B 'then':156B 'third':55B 'this':45B,52B,66B 'tightening':106B 'to':19B,77B,81B,160B,185B,194B 'too':103B 'turn':127B 'two':59B 'update':172B 'use':71B 'wailing':62B 'wanted':18B 'was':6B 'when':61B 'will':101B 'with':128B,137B 'work':102B 'wrench':130B 'www.youtube.com':15B 'www.youtube.com/watch?v=b98bj36k1wo]':14B 'you':88B,120B,157B 'your':145B21:T59b,This Is A Remix From The User **"Sch5034"** Https://Www.Thingiverse.Com/Sch5034/About

I Am Using It On My Roland Td12K Drumkit For Mounting The Cymbals. Since The Original Ones Broke. It Might Work On Other Drumkit As Well Since The Diameters Are Kind Of A Standard.

I Redesigned It To Have It Installed Without The Need To Remove The Rack Tubes Of The Drumrack. In My Case, I Needed To Remove It To Get It Installed.

It Is Also Possible To Print It Without Support.

**Don'T Be Confused The Holes Have A Thing 0.2Mm Layer To Let It Print Without Support. So Its Not An Issue Of The Stl.**

The Main Hole(Bigger One) To Mount It On The Drumrack Is A Bit Bigger In Diameter. There Is A Stl File Called **"Flexpart_V1.Stl"**. This One Needs To Be Printed With Ninjaflex (Or Any Similar Flexible Filament). See On One Of The Pictures The Little White Layer Between The Clamp And The Rack. It Is There For Giving A Good Grip On The Drumrack. Since Without It, I Had Some Issues With Not Being Properly Fixed On The Drumrack.

There Is Also A Screw-Handle To Have A Quick Release Option To Properly Position Whatever You Mount. The 2 Hexagon Screws Go Into It And Then You Just Glue In The **"Quickrelease_Filler_V2.Stl"**

**Do Not Tighten The Screws Too Much. It Might Break At Some Spots Or It Will Break After A While Because There Might Be Too Much Tension.**22:T913,

Found 13 3D-models for “drumkit” across many websites

Drum Rim Mount for GoPro

Drum Stick Holder for Drum Kits

Hi-hat clutch

Roland Drum Rack Clamp (remix)

Ludwig Breakbeats (by Questlove) Tom Memory Lock Clamp Adapter

Clip Drumstick Holder

Endcap (37.5mm) tube drum-kits

Drumstick holder for Roland / Yamaha / E-drums

Alesis Compactkit7 drum kit stand endpiece

Roger Taylor Drums

Pencil Drum Kit Desk Toy

ROLAND TD-17 Breakout Box

TD-17 Mounting Plate