This was primarily designed to fit this Titan Aero mount or my remix to the brilliant BLV mgn12 AM8 mod. Travel limits are about X = -9 Y = -22 for Volcano, X= -6, Y= -27 for v6. Update (12/4/2019): I've been using this mount for a while now and my printer has been performing exceptionally well. I can never leave well enough alone though, so I've thought of some changes to add. The biggest gripe I have with my adapter and its associated mounts is that they attach by only two screws. The leads to some flexibility in the mount when you push on it vertically. While this probably doesn't lead to any print defects, I would like things to be as rigid as possible! I will likely edit the designs of the adapter and extruder mount to add a 3rd mounting hole. Triangles are better than lines, after all. ;) Look out for an updated design in the coming weeks. I'll have to figure out whether I want to make an all-in-one solution with belt attachment welded to the adapter and a point on top to attach to, or whether to loop behind and underneath the 2020 extrusion and grab in down there. Who knows! :D Update (8/30/2019): I never really liked the giant and bulky fan duct on the original mount, so I have since upgraded to thing:3192682 for extra performance! Update (6/27/2019): Added v3 of X endstop for RAMPS/Makerbot style endstops. Added additional length to clear the mgn12 rail. May reduce travel distance by a mm or so.. Update (6/13/2019): At long last, this should be finally 100%. I removed all endstop triggers, as they are not necessary! Everything is nice and cleaned up and ready to go. I am using the v5 optimized heatset version, and it is working great! I also added some aesthetically... something models. They are based on the standard adapter (not optimized) and may not be as functional. Have fun! Update (6/8/2019): I've finally gotten around to designing a new X endstop mount. I only have about 2mm between the nozzle and bed when x=0. I designed a mount to fix on top of the X motor mount, and moved the switch inward a bit. This should give me some of the travel back, not that it was totally necessary. I've designed it such that you will need to replace the last M5x10 button head screw on the X motor mount with an M5x12 socket head cap screw. I'm printing it now. Also, at some point I need to remove the x endstop triggers on ALL models. It is unnecessary, as it just reduces home offsets even more. The adapter triggers fine with stock X endstop mounts. Update (5/24/2019): I installed v4 of the optimized version. It probably does not require a trigger block at all. I added a single M5 washer between the extruder carriage and mgn carriage adapter, and it triggers fine. It looks to be about 2mm off the build plate, so the home offsets are X= -2 and Y= -22. It's all working!!

Found 11 3D-models for “Linear rail adapter” across many websites

Hictop CR-10 X Linear Rail Upgrade

BLV MGN12 AM8 Titan Aero Creality adapter

MGN12 Linear Rail Carriage Joiner

Y linear rail adapter for Tronxy X5S

RJ4JP Bearing Adapter

Adapter for 6mm linear rail bearing slider

Tube / Rod / Shaft adapter 16mm to 20mm

Endstop mount for SBR20 (20mm) linear rails

MGN12 Endcap for 2020 Profile

Linear Rail adapter - X axis - Anet E10

MGN12H Block to MGN15C Plate Adapter