If You enjoyed this project and You want to say "Thank You" please consider supporting me by sending a tip on thingiverse or my PayPal
here.

Here is my version of **RatRig V-Core**. The biggest change from the original one is a different extruder. Here I'm using direct extruder because it's a lot more precise than a bowden extruder. Another important change is enclosure which You can see on the photos. You also will find here a lot of useful parts for this 3D printer. Z_V-slot_set - You need 4 of these. It will allow You to precisely mount profiles which lead the Z Axis. I have changed original idlers for tooth idlers as You can see on the photos. It makes the belt more stable as its teeth don't compress on the flat idlers. Without toothed idlers You may experience more visible ghosting, and visual patterns on the flat surfaces. You need 6 of them, type: Bore 5mm With Teeth. - Toothed idlers which I have used: http://bit.ly/2QxFmJr **Enclosure** is made from 4 mm Plexiglass which needs to be cut by laser. You can use thinner Plexiglass. With 4 mm Printer is really heavy - about 18 kg. In the download section You will find .dxf files for the laser cutter. You will need more M5x8 screws and T-Nuts to install it. On the bottom plate You will find holes for PSU, Duet 2 Wifi and SSR. **Here is a list of parts which I'm using:** - PSU Meanwell LRS-350-24: http://bit.ly/2ScxuOL - Duet 2 Wifi: http://bit.ly/2TzMFPm - PT100 Module: http://bit.ly/2IbDq67 - DC-DC Step Down Module: http://bit.ly/Przetwornica - SSR KIT AC 40A: http://bit.ly/2S6crxx - Nema 17 Wantai 42BYGHM809: http://bit.ly/2UwYfuV - Keenovo Silicone Heater: http://bit.ly/2TgODUF - Titan Aero (clone): http://bit.ly/2UwZPNn - Titanium heatbreak: http://bit.ly/2RmEkgk - BLTouch: http://bit.ly/2WpGaR7 **Parts which I have designed for this 3D printer:** - Titan Aero & BLTouch Carriage for RatRig V-Core: http://bit.ly/2CWeMBT - Simple Enclosure Hinge: http://bit.ly/2pu2hdH - Power Switch Cover - IEC320: http://bit.ly/2CWbgYg **Other parts which are worth using when building this 3D Printer:** - V-Slot End Caps: http://bit.ly/2OjJxG6 - V-Slot Snap Cover for hiding cables: http://bit.ly/2NXXE4R - NEMA17 Motor Vibration Dampeners: http://bit.ly/2D05xjT - Chain used with bed: http://bit.ly/2QAxU03 - V-Slot Cable Clips: http://bit.ly/2Oaaltz - V-Slot Cable Mount: http://bit.ly/2D36cRZ

Found 2 3D-models for “aero ss” across many websites

Morgan badge

RatRig V-Core CUSTOM! - Titan Aero and Enclosure