Popper Licious

Preferred Scale: 150% With 3 Walls And 3 Top And Bottom Layers At 0.3 And 10-15% Grid Infill At 45 And - 45 Degrees, This Has Given Me The Best Results As There Will Be An X Through The Middle Of The Lure And The Chamber Will Have A Much Smaller Bridging To Do. The Popper, When Resting In The Water, Has To Sit At An Angle (See Picture For Reference) I Had To Play Around With Different Hook Sizes Until I Was Able To Find The Right Combination. One Thing To Keep In Mind Is, If You Print It At 100% Size, It Will Be Very Dense And Not Float Much (Even Sink Once The Hooks Are On) So Consider Lightening It Up When Printing Smaller Versions Than 130%. If You Intend To Use A Bb For Rattling, Don'T Forget To Pause The Print To Add It. The 3 Holes Are Designed To Not Come Out As Holes But To Trick The Slicer Into Adding Material In That Area So The Eye Screw Has Something To Bite Into. I Personally Drill The Holes With A Bit Half The Diameter Of The Eye Screw And Then Use Epoxy To Secure It. Poppers Are My Favorite Type Of Lures And I Decided To Design My Own, Features Include: * Chamber For Steel Bb (Rattler) * Scalable, You Can Print Them At Different Scales To Match The Size Of Fish On Your Lake * Gills That Shoot Water As You Pop It. Everything You Need To Finish This Lure: Budget Treble Hooks Better Quality Hooks Split Rings Split Ring Tool Eye Screws

Found 1 3D-models for “fishig-lure” across many websites

Popper Licious - Lure - Fishing Lure