Middara Act 1 Card Dividers (Edition 1.1)

Card dividers for use with my Act 1 insert found here: https://www.thingiverse.com/thing:4858405

How to use/store

Sub section dividers
Each items divider has the following sub dividers: Armors, Weapons, Relics, Cores, Uniques
Consumables divider has the following sub dividers: Mundane, Common, Uncommon, Rare

Print one of everything except:

Designed for 0.2mm layers- 2 layers for card and 2 layers for text.
Single Nozzle Colour Change - Use the colour change command (gcode M600) in your slicer or editing the gcode file at the start of layer 3 to print the text in a different colour. If your filament settings are very different then you gcode to change the temperature of the hotend and flow extrusion as well.
On Ender 3 the M600 instruction is not implemented by default. With Jyers firmware there is an implementation but it seems bugged at the moment. Instead you can use pause at height as demonstrated here:
Works best if the bed is very flat and the live z is perfect or a little high so there are no marks on the surface (as its only 2 layers).
Placement - I found that placing several dividers in a vertical line on the center of my print bed produced more consistent prints for these 2 layer prints, as they weren't directly above hot spots of the bed.

Yes, you are free however to send me a tip via thingiverse for a coffee if you found this useful.