Dog Tag of the Spartan Order from the Gluchovskij METRO series. Design is based on both the book (described in the METRO 2035) and the logo presented in the METRO games. There are four versions: * OrderTagRU - tag in russian with the word Order (more bookish) * SpartaTagRU - tag in russian with the word Sparta (more gamish) * OrderTagEN - tag in english with the word Order (more bookish) * SpartaTagEN - tag in english with the word Sparta (more gamish)

Tutorial for the multicolor print using any printer

It might sound strange, but every 3D printer is capable of layer-based multicolor print by spliting the generated GCode file into multiple (one file for each color). Gcode files contain the instructions for the printer such as movement of the motors or the temperature of the heatbed. You should never changes any value in the GCode if you don't know the result. But let's move on. - Firstly you need to download [Slic3r](http://slic3r.org/) or [Slic3r PE](https://www.prusa3d.cz/slic3r-prusa-edition/)(recommendet) in order to see the comment `;AFTER_LAYER_CHANGE` in the Gcode file. These comments are added by Slic3r and determines where in the GCode the new layer is being change. - Secondly you slice your file using Slic3r then you open the generated file in text editor such as a regular Notepad. You are looking for comment `;AFTER_LAYER_CHANGE` followed by the `;XX.X` where XX.X is desired layer. For example: you want to print first 2mm of the model in one color and the rest in the second color. You are going to print the model at 0.2mm resolution. Open generated GCode and look for:

 ;AFTER_LAYER_CHANGE ;2.2

For printing at 0.1mm resolution you are looking for lines:

 ;AFTER_LAYER_CHANGE ;2.1

etc. You just found the place where to split the Gcode file! - Now you copy the lines of Gcode into separated file and modify the GCode. Last line before the comment `;AFTER_LAYER_CHANGE` tells the printer to move in the Z axis therefore in order to simplify the process of the filament replacement I recommend increase that value a bit. For example: we have following file with the comment `;AFTER_LAYER_CHANGE` found:

 [BEGIN] ... ... G1 E-0.04000 F2100.00000 G1 Z2.600 F10800.000 move in Z axis to position 2.6mm ;AFTER_LAYER_CHANGE ;2.2 G1 X107.365 Y144.542 move in to new XY position G1 Z2.200 move in Z axis to position 2.2mm ... ... [END]

So we split the GCode into two files and we modify the Z position in the first file in order to make the filament change easier part1.gcode:

 [BEGIN] ... ... G1 E-0.04000 F2100.00000 G1 Z52.600 F10800.000 move in Z axis to position 52.6mm ;AFTER_LAYER_CHANGE ;2.2

part2.gcode:

 G1 Z2.600 F10800.000 reverting the changes from file1.gcode ;AFTER_LAYER_CHANGE ;2.2 G1 X107.365 Y144.542 G1 Z2.200 ... ... [END]

- Lastly, you just print splited files and viola you have your mutlicolor print Recommendations and warning: Watch your printer durring the first mutlicolor print. Also, I have no responsibility for possible damage on your print.

Found 13 3D-models for “military dog” across many websites

Military Tag Cross

Service Dog On Board

Reveille 3D

military dog

METRO (Spartan) Order Dog Tag

Dog Tag Prayer

Blank Dog Tag

Boom Operator Dog Tag

Dog Tag Mythosaur Skull This Is The Way

Thank you for your service

Call of Duty keychain

Winston Churchill Dog Tag

Dog Tag